Topographical Survey in Newark, Nottinghamshire

20,000m² Topographical Survey for Development Feasibility

Landtech Surveys recently completed a topographical survey of approximately
20,000m² of land in the Newark area of Nottinghamshire.
The initial enquiry came from the client's architect, who required accurate existing site information to assess the development potential of the land and progress the design work. The survey was commissioned directly by the landowner.
The survey covered the main parcel of land, an access track, existing buildings and approximately 50 metres of the adjacent public highway.
A key requirement was to capture sufficient levels and detail to allow the architect to produce sections showing the relationship between the highway and the development site. The highway formed the lower point of the site, with the land gradually rising towards the south.
The completed topographical survey was supplied in both DWG and PDF formats, with the final drawing ready for the architect the following day.
Surveying approximately 20,000m² of land
The site comprised a gently sloping parcel of land with a mixture of open areas, vegetation, trees, existing buildings and an access track.
The survey recorded the physical features that could influence the proposed development, including:
Site boundaries
Fences, walls and hedges
Trees and vegetation
Existing buildings
Building eaves and ridge heights
Ground levels
Drainage features and manholes
Utility covers and visible services
Kerbs and highway details
The access track
Levels across the site
Approximately 50 metres of the public highway was also surveyed, including kerbs, service covers and levels.
Capturing the highway was particularly important because of the change in elevation between the road and the land. The surveyed information provided the architect with the levels required to understand the site's relationship with the existing highway and to produce sections through the proposed development area.
Do you need a topographical survey? Contact us to discuss your project.
Combining drone surveying, laser scanning and GNSS
Three different surveying technologies were used to complete the survey efficiently:
DJI Matrice 4E RTK drone

The RTK-enabled DJI Matrice 4E was used to rapidly capture aerial information across the large survey area.
Approximately 370 photographs were captured, with the drone flight itself taking around 5–10 minutes. Some additional photographs were manually captured where required.
The drone data was also used to produce an orthophoto, providing a useful aerial representation of the site alongside the surveyed CAD information.
For a site of approximately 20,000m², drone surveying allowed a large amount of information to be captured very quickly, while still allowing the survey to be tied into the ground survey control.
Trimble X7 laser scanner

The Trimble X7 was used to capture detailed information around the existing buildings and along the access track.
Parts of the access route and areas around the buildings were beneath tree canopy, where laser scanning provided a useful way of capturing detailed information that could be difficult to obtain efficiently from aerial photography alone.
The X7 was therefore used alongside the drone rather than as a replacement for it, with each technology being used where it was most effective.
Trimble R12 GNSS
A Trimble R12 GNSS system was used to establish the survey control and tie the survey to the Ordnance Survey National Grid.
Ground Control Points (GCPs) and check points were also established for the drone survey. This provided the necessary control to combine the aerial survey data with the ground-based measurements and laser scanning.
There was no existing survey control on the site, so the control required for the survey was established as part of the project.
Capturing the levels needed for the architect
One of the important aspects of this survey was understanding the site's changing levels.
The public highway was at the lower point of the surveyed area, with the land rising gradually towards the south. Simply showing the site boundary and physical features would not have provided the architect with everything required to understand the site's development potential.
The survey therefore included sufficient spot levels and topographical information across the site and highway to allow the architect to produce sections through the land.
The sections were produced by the architect using the survey information supplied by Landtech Surveys.
This is an important distinction between the survey and the architectural design work:
Landtech Surveys provided the accurate measured site information; the architect used that information to produce the design sections.
A 3–4 hour site survey
Despite the survey area covering approximately 20,000m², the fieldwork was completed in around 3–4 hours.
The combination of RTK drone surveying, GNSS and laser scanning allowed the site to be surveyed efficiently without relying on a single surveying method.
The weather conditions were also excellent for the drone survey, allowing the aerial photography to be completed quickly.
There was even an unexpected audience during the survey, with a group of reindeer in an adjoining field keeping an eye on the Landtech team as the work progressed.

Although the reindeer were outside the survey area, they provided an unusual reminder that every land survey can present something a little different.
Survey drawing completed the following day
Following the site visit, the survey information was processed and combined into the final topographical survey drawing.
The completed survey was supplied to the client in:
DWG format for use within CAD and architectural design software
PDF format for straightforward viewing and reference
Orthophoto imagery providing additional aerial context
The final survey drawing was ready the following day.
For architects and developers, having accurate survey information available quickly can be particularly useful during the early stages of a project. A topographical survey provides the existing ground levels and physical features needed to develop designs around what is actually present on the site rather than relying on assumptions or outdated mapping.
Topographical surveys for development and planning
A topographical survey is often one of the first pieces of technical information required when considering the development potential of a site.
Accurate information about existing levels, boundaries, buildings, vegetation, drainage, access and surrounding features can help architects understand the constraints and opportunities presented by the site.
Where there is a significant change in level between the highway and the proposed development area, accurate survey information becomes particularly important. Levels can influence access arrangements, finished floor levels, drainage, earthworks and the overall relationship between a proposed development and its surroundings.
In this Newark project, providing detailed survey information across both the development land and the adjacent highway gave the architect the information needed to develop their sections through the site.
Land surveyor for topographical surveys in Newark and Nottinghamshire
Landtech Surveys provides topographical surveys for architects, developers, landowners and other property professionals across Newark, Nottinghamshire and the surrounding areas.
By combining Trimble GNSS, laser scanning and RTK drone surveying, we can select the most appropriate surveying technology for the site and efficiently capture both large areas and detailed features.
Every site is different, so the equipment and surveying methods used are selected according to the size, terrain, vegetation, buildings and information required.
For this Newark survey, the combination of the DJI Matrice 4E, Trimble X7 and Trimble R12 allowed approximately 20,000m² of land, the access track, buildings and part of the public highway to be surveyed during a 3–4 hour site visit.
The completed survey was supplied in DWG and PDF formats, with the drawing available to the client the following day.
Need a topographical survey in Newark?
If you are an architect, developer, landowner or property professional considering a development project in Newark or Nottinghamshire, Landtech Surveys can provide an accurate topographical survey tailored to the requirements of your project.
Contact Landtech Surveys to discuss your requirements for a topographical survey.
Landtech Surveys carries out topographical, measured building, boundary, drone and other land surveying services across Nottinghamshire, Derbyshire and throughout the UK.





Comments